Kreg Precision Router Table Setup Bars

PRS 3400

 

Finally someone got it right! There are brass bars, saw blade height gauges and router bit height gauges. Kreg has put them all together in one set.

 

Made from soft aluminum so they won't hurt blades or bits if they come in contact with the bars. The bars have a cut out in the middle of the bar, on the edge, so you can straddle the saw blade or router bit. The cut out is wide enough to fit over a dado blade and long enough, in the area of six inches long, that you can set the bar flat on the table surface on either side of the blade.

 

On the other side of the bar, opposite the cut out is the same size in a step. Once you make the cut, you can check the depth of the cut.

 

If that's not enough, there is a stem on the end of the bar to measure the distance from the blade or bit to the fence.

 

There are bars ranging from one eighth to one half by sixteenths and no size is skipped. They all fit inside a molded plastic case so you can keep track of them.

 

These are a welcome addition to my measuring collection.

 

Return to product reviews

 

Return to home page